LCD Display + Touch Screen Digitizer Assembly for Xiaomi Redmi Note 4

Please check your phone version before order:

1. For Xiaomi redmi note 4 5.5",MTK Helio X20 Deca Core version (Size : 5.5 inch (151 x 76 x 8.35 mm) MTK version)
2. For Xiaomi redmi note 4 5.5" global version ,Qualcomm Snapdragon 625 Octa Core.((151 x 76 x 8.45 mm) Snapdragon version)

LCD display screen for Xiaomi Redmi Note 4 Pro Prime, LCD display screen is OGS, touch screen and LCD screen can't be separated.

Specifications

For Xiaomi redmi Note 4 Pro prime 5.5inch
Every LCD display + touch screen has been tested in good condition before shipment
Replace your faulty, broken or cracked LCD Display + touch screen
Valid tracking number: Keeps you informed on parcel progress to its delivery destination

① LCD For Xiaomi Redmi Note 4 (CPU: MTK Helio X20 Deca Core version )

② LCD For Xiaomi Redmi Note 4 global version & Redmi Note 4X (CUP: Snapdragon 625 Octa Core)

 

 

About the product
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Xiaomi Redmi Note 4 Smartphone
2. Replace the old, broken, cracked, damaged one 
3. Make your device look more refreshing than ever 
4. Completely fit and work 
5. Each item has been checked and in good condition before shipping 
6. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

Before Installation Notes
1. Tips 1: Test before installation 
When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. 
Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. 
Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 
2. Tips 2: Simulates testing 
Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible if the mobile phone is damaged during installation. 
3. Tips 3: Do not over-bend cable 
Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.