LCD Display + Touch Screen Digitizer Assembly for Xiaomi Redmi Note 3 Pro 152mm Special Edition

Attention:
Xiaomi Redmi Note 3 have two versions.Not the same size.Please Verify your phone model size before purchase

Only Compatible
Edition/SE/EU Version of Xiaomi Redmi Note 3 (Pro/Prime) 152*76*8.65mm SIZE
DO NOT FIT For Xiaomi Redmi Note 3 (Pro/Prime)150*76*8.65mm) SIZE

- Item Brand New, Premium Grade A
- To Repair for Faulty Screen, Dead Pixels, Cracked, Wrong Color, Broken LCD Problems
- Full Tested 100% Working By Real equipment before Shipping
- Not supply the disassembly installation instructions and Tools

Before Installation Notes:
1. Tips 1: Test before installation 
When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. 
Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. 
Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 
2. Tips 2: Simulates testing 
Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible if the mobile phone is damaged during installation. 
3. Tips 3: Do not over-bend cable 
Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.