LCD Display + Touch Screen Digitizer Assembly for Motorola MOTO G2

In stock
SKU
PA1013680
Add to Compare
$17.80
for Motorola Moto G2 XT1063 XT1064 XT1068 LCD Display + Touch Screen Digitizer Assembly
Add to Wish List

About the product
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Motorola MOTO G2 XT1063 XT1064 XT1068
2. Replace the old, broken, cracked, damaged one
3. Make your device look more refreshing than ever
4. Completely fit and work
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts

Before Installation Notes
1. Tips 1: Test before installation
When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.
Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.
Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.
2. Tips 2: Simulates testing
Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible if the mobile phone is damaged during installation.
3. Tips 3: Do not over-bend cable
Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.

Write Your Own Review
You're reviewing:LCD Display + Touch Screen Digitizer Assembly for Motorola MOTO G2
Your Rating
Back to Top

Motorola MOTO G2 LCD Screen Replacement Part

$17.80